Walbro 255 LPH Fuel Pump Kit for Holley Sniper and FiTech EFI Systems

$243.47
In stock
SKU
WFP-FT1

Are you looking for the perfect fuel pump kit to complement your new Holley Sniper or FiTech Throttle Body Fuel Injection System? Look no further! This kit contains absolutely everything you need to upgrade your carbureted fuel system to EFI in a safe and professional manner. Take a look at what's included:

Item #DescriptionQty
1 Walbro 255 LPH Fuel Pump w/ 3/8-inch Hosebarb Inlet/Outlet & Installation Kit 1
2 Earl's 3/8-Inch Vapor-Guard EFI Hose, per foot 20
3 EFI Hose Clamps 11
4 Post Fuel Filter, 10 micron 1
5 Pre Fuel Filter, 20 micron 1
6 Holley Fuel Pump Block-Off Plate OPTIONAL
7 Earl's -6 AN to 3/8-Inch Vapor-Guard Hose End 4
8 Fuel Cuff (240mm Long) 1
9 9/16-Inch Teflon Washers 2
10 Earl's -6 AN Bulkhead Nut 1
11 Earl's -6 AN Bulkhead Fitting, 90-Degree 1

Component Installation Overview

Walbro 255 LPH Fuel Pump Kit for FiTech EFI

Installation is straight-forward.  Detailed instructions are provided in the included installation manual (link below.).  It involves installing a Walbro high-performance 255 LPH inline fuel pump between the tank and adding a return line.  No return port on your carburetor-era fuel tank?  No problem!  Included is a fuel bulkhead that is easily installed.  Proper filters are also included to protect both the fuel pump and fuel injectors. This kit must always be installed with a return line to the fuel tank and may never be powered with a Pulse-Width Modulated (PWM) power source. PWM operation can seriously damage Walbro gerotor pumps. These pumps are not benefitted by PWM speed control. Simply disable the PWM feature if you are running a FiTech GoEFI system with PWM fuel pump speed control capabilities.

Download & Preview Instructions Here

More Information
tagz FITECH SNIPER
Write Your Own Review
You're reviewing:Walbro 255 LPH Fuel Pump Kit for Holley Sniper and FiTech EFI Systems
Your Rating
Copyright © 2006-present WalbroFuelPumps.com, Inc. All rights reserved.