Walbro FRD-4 Fuel Pump On Demand- Industrial **Special Order**
$315.94
Out of stock
Only 0 left
SKU
FRD-4
**Special Order:** This item is not regularly stocked and may require additional processing time before shipment.
The Walbro FRA-4 Industrial Fuel Pump is the highest flowing of the FRA and FRD pumps, which feature smaller 1/8th inch NPT inlets and outlets for use in lower-flowing applications. It does not include a check valve to prevent reverse flow, and fuel can flow through the pump when it is not powered. It has low current draw (2 amps) but is rated to support a dry lift of up to 24 inches. A filter is required before the pump, such as a sock-type filter on the pickup, to prevent damage to the pump from debris in the fuel tank. This pump supersedes the Walbro 2402-1 fuel pump, which is discontinued.
The Walbro FRA-4 Industrial Fuel Pump is the highest flowing of the FRA and FRD pumps, which feature smaller 1/8th inch NPT inlets and outlets for use in lower-flowing applications. It does not include a check valve to prevent reverse flow, and fuel can flow through the pump when it is not powered. It has low current draw (2 amps) but is rated to support a dry lift of up to 24 inches. A filter is required before the pump, such as a sock-type filter on the pickup, to prevent damage to the pump from debris in the fuel tank. This pump supersedes the Walbro 2402-1 fuel pump, which is discontinued.
**Special Order Information:**
We understand that this item is essential to you. Please note that it is a special order, and obtaining it might take longer than usual. Our team is actively working to secure this product for you.
**What to Expect:**
- Extended Processing Time: Please anticipate a longer processing time before your order ships.
- Manufacturer Delays: Due to the limited demand and specialized nature of the product, delays from Walbro are possible.
We understand that this item is essential to you. Please note that it is a special order, and obtaining it might take longer than usual. Our team is actively working to secure this product for you.
**What to Expect:**
- Extended Processing Time: Please anticipate a longer processing time before your order ships.
- Manufacturer Delays: Due to the limited demand and specialized nature of the product, delays from Walbro are possible.
The Walbro FRD-4 Industrial Fuel Pump is the highest flowing of the FRA and FRD pumps, which feature smaller 1/8th inch NPT inlets and outlets for use in lower-flowing applications. It does not include a check valve to prevent reverse flow, and fuel can flow through the pump when it is not powered. It has low current draw (2 amps) but is rated to support a dry lift of up to 24 inches. A filter is required before the pump, such as a sock-type filter on the pickup, to prevent damage to the pump from debris in the fuel tank. This pump supersedes the Walbro 2402-1 fuel pump, which is discontinued.
The difference between FRA4 and FRD4 is that FRA4 is a continuous duty pump and FRD4 is an on demand pump.
All Walbro Marine and Industrial Fuel Pumps Feature:
- Low Current Draw
- Reverse-Polarity Protected up to 60 minutes
- Self-Priming (Dry Lift) of more than 48" (120 cm)
- Dry Run to Four Hours
- Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
- Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
- Protection from Transient Voltages to 100 vdc
- US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
- European CE Standard Approved (EN 61000-6-2 and EN 63-2100)
Additionally, all Walbro FRA-Series Pumps Feature:
- Weight of 1.63 lbs (0.74 Kg)
- Pump Cycles On Demand
| Part Number | FRD-4 |
|---|---|
| Short Description | **Special Order:** This item is not regularly stocked and may require additional processing time before shipment. The Walbro FRA-4 Industrial Fuel Pump is the highest flowing of the FRA and FRD pumps, which feature smaller 1/8th inch NPT inlets and outlets for use in lower-flowing applications. It does not include a check valve to prevent reverse flow, and fuel can flow through the pump when it is not powered. It has low current draw (2 amps) but is rated to support a dry lift of up to 24 inches. A filter is required before the pump, such as a sock-type filter on the pickup, to prevent damage to the pump from debris in the fuel tank. This pump supersedes the Walbro 2402-1 fuel pump, which is discontinued. |
Write Your Own Review