Walbro FRB-2 Fuel Pump - Industrial

$193.15
In stock
SKU
FRB-2
The Walbro FRB-2 Industrial Fuel Pump is the only 24-volt pump in the FR series that is not marine rated. Other than that, this pump is virtually identical to the FRB-23 except for the single positive connector and negative lead grounded to the pump chassis, which is done to maintain direct compatibility with the Walbro 6067, which has been discontinued. If you don't require 6067 compatibility, the FRB-23 would be the better choice, adding a 1000 hour salt spray resistance (versus 96 hours) and cost that is slightly less.

FRB-2 RECIPROCATING FUEL PUMP

The Walbro FRB-2 Industrial Fuel Pump is the only 24-volt pump in the FR series that is not marine rated. Other than that, this pump is virtually identical to the FRB-23 except for the single positive connector and negative lead grounded to the pump chassis, which is done to maintain direct compatibility with the Walbro 6067, which has been discontinued. If you don't require 6067 compatibility, the FRB-23 would be the better choice, adding a 1000 hour salt spray resistance (versus 96 hours) and cost that is slightly less.

All Walbro Marine and Industrial Fuel Pumps Feature:

  • Low Current Draw
  • Reverse-Polarity Protected up to 60 minutes
  • Self-Priming (Dry Lift) of more than 48" (120 cm)
  • Dry Run to Four Hours
  • Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
  • Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
  • Protection from Transient Voltages to 100 vdc
  • US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
  • European CE Standard Approved (EN 61000-6-2 and EN 63-2100)

Additionally, all Walbro FRB-Series Pumps Feature:

  • Continuous Duty Life Over 18,000 Hours (Diesel Fuel)
  • Weight of 1.83 lbs (0.83 Kg)
  • Pump Cycles Only On Fuel Demand
  • Replaceable Filter

FRB-2 Pump Specification

PERFORMANCE
  • Voltage: 24 Volt (16.0 min – 32.0 vdc max)
  • Minimum Flow Rate: 162 liters per hour (43 gph)
  • Deadhead Pressure: 56 to 76 kPa (8.0 to 11.0 psi)
  • Maximum Current Draw: 1.7 amps
  • Life: >18,000 hours
  • Dry Lift: 48 inches (120 with optional outlet check valve)
  • Compatible Fuels:No-lead regular gasoline, premium gasoline, gasoline-alcohol blends, diesel and biodiesel fuels (20% and 100%), and E85
  • Corrosion Resistance: 96 hour salt spray test (ASTM B-117)
  • Operating Temperature Range: -40ºF to 155ºF (-40ºC to 68.3ºC)
ELECTRICAL
  • Reverse Voltage Protected
  • Transient Voltage Protection
  • Ground: Circuit Board is Not Internally Grounded to Pump Body
  • Electrical Connection: Flying lead (1); No connector
  • Fuse: 5 amp recommended
MECHANICAL
  • Inlet & Outlet Size: 1/4-18 NPSF
  • Inlet Filter Screen: 70 micron
  • Magnetic Trap: Yes
  • Outlet Check Valve: None
AVAILABLE OPTIONS:
  • Adjustable Pressure Regulator 135-631
  • Outlet Check Valve Fitting 128-3202 (5/16 Hose Barb)
More Information
Part Number FRB-2
Short Description The Walbro FRB-2 Industrial Fuel Pump is the only 24-volt pump in the FR series that is not marine rated. Other than that, this pump is virtually identical to the FRB-23 except for the single positive connector and negative lead grounded to the pump chassis, which is done to maintain direct compatibility with the Walbro 6067, which has been discontinued. If you don't require 6067 compatibility, the FRB-23 would be the better choice, adding a 1000 hour salt spray resistance (versus 96 hours) and cost that is slightly less.
Write Your Own Review
You're reviewing:Walbro FRB-2 Fuel Pump - Industrial
Your Rating
Copyright © 2006-present WalbroFuelPumps.com, Inc. All rights reserved.