Walbro FRA-4 Fuel Pump - Industrial

$135.42
In stock
SKU
FRA-4
The Walbro FRA-4 Industrial Fuel Pump is the highest flowing of the FRA and FRD pumps, which feature smaller 1/8th inch NPT inlets and outlets for use in lower-flowing applications. It does not include a check valve to prevent reverse flow, and fuel can flow through the pump when it is not powered. It has low current draw (2 amps) but is rated to support a dry lift of up to 24 inches. A filter is required before the pump, such as a sock-type filter on the pickup, to prevent damage to the pump from debris in the fuel tank. This pump supersedes the Walbro 2402-1 fuel pump, which is discontinued.

The Walbro FRA-4 Industrial Fuel Pump is the highest flowing of the FRA and FRD pumps, which feature smaller 1/8th inch NPT inlets and outlets for use in lower-flowing applications. It does not include a check valve to prevent reverse flow, and fuel can flow through the pump when it is not powered. It has low current draw (2 amps) but is rated to support a dry lift of up to 24 inches. A filter is required before the pump, such as a sock-type filter on the pickup, to prevent damage to the pump from debris in the fuel tank. This pump supersedes the Walbro 2402-1 fuel pump, which is discontinued.

All Walbro Marine and Industrial Fuel Pumps Feature:

  • Low Current Draw
  • Reverse-Polarity Protected up to 60 minutes
  • Self-Priming (Dry Lift) of more than 48" (120 cm)
  • Dry Run to Four Hours
  • Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
  • Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
  • Protection from Transient Voltages to 100 vdc
  • US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
  • European CE Standard Approved (EN 61000-6-2 and EN 63-2100)

Additionally, all Walbro FRA-Series Pumps Feature:

  • Continuous Duty Life Over 5,000 Hours (Diesel Fuel)
  • Weight of 1.63 lbs (0.74 Kg)
  • Pump Cycles Continuously When Powered
More Information
Part Number FRA-4
Short Description The Walbro FRA-4 Industrial Fuel Pump is the highest flowing of the FRA and FRD pumps, which feature smaller 1/8th inch NPT inlets and outlets for use in lower-flowing applications. It does not include a check valve to prevent reverse flow, and fuel can flow through the pump when it is not powered. It has low current draw (2 amps) but is rated to support a dry lift of up to 24 inches. A filter is required before the pump, such as a sock-type filter on the pickup, to prevent damage to the pump from debris in the fuel tank. This pump supersedes the Walbro 2402-1 fuel pump, which is discontinued.
Write Your Own Review
You're reviewing:Walbro FRA-4 Fuel Pump - Industrial
Your Rating
Copyright © 2006-present WalbroFuelPumps.com, Inc. All rights reserved.