Walbro 450LPH Fuel Pump High Pressure TIA485-2 F90000267 (Universal E85 Ethanol) TI Automotive
Walbro 450LPH - TI Automotive TIA485-2 Fuel Pump
Walbro Part Number: F90000267 / 400-1168 Full Install Kit
Type: Universal E85 Intank Fuel Pump
Fuel: FLEX (E85 Ethanol Safe)
Horsepower: 750HP+
Flow Rate: 450LPH
Operating Pressure: 35-87 PSI
Outlet diameter: 10mm (3/8") Diameter (upper body) 39mm Diameter (lower body) 50mm
Caution: Extremely High Counterfeit Rate - Buy from an Authorized Dealer Only
TI Automotive Walbro TIA485-2 / F90000267 internal E85 HP RACING fuel pump plus Install kit
The innovative design of the DCSS 39/50 features a single impeller with two parallel rows of turbine blades.
Designed for E85 or Gasoline applications for high performance engines exceeding 750hp.
Designed for engines with more than 750 HP
Award-winning OE technology
High-pressure, high-flow performance OEM technology designed and developed for E85 Ethanol
Dual channel turbine design for maximum efficiency under high pressure and high temperature applications
Made in USA by TI Automotive (formerly known as Walbro)
- Designed for engines with more than 750 HP
- Award-winning OE technology
- High-pressure, high-flow performance
- OEM technology designed and developed for E85
- Able to operate up to 87 psi total fuel pressure
All pumping components have been validated to OEM specifications for approved use in E85/flex fuel applications
Installation kit ( fuel strainer, fuel hose, harness pigtail, 2 clamps, 2 wire connectors )
The F90000267 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed.
The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge.
This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps.
SPECIFICATIONS: 465 lph @ 40 psi and 13.5V (14.1 amps) in gasoline
Outlet diameter: 10mm (3/8")
Diameter (upper body) 39mm
Diameter (lower body) 50mm
400-0085 Install kit has been discontinued and replaced by 400-1168
Fitment Notes | Capable of replacing almost any fuel pump with minor to moderate adjustments and modification. Professional fabrication and installation Recommended. |
---|---|
Walbro Fuel Pump | F90000267 450LPH |
Fuel Pump Type | Electric High Performance E85 Compatible |
Fuel Pump Voltage | 13.5V (14.1 amps) in gasoline |
Install Repair Kit | Includes New Install Kit 400-1168 |
Filter Number | 125-190 |
Important Remarks | Final fuel pressure set by regulator |
Walbro Comments | E85 Ethanol Safe |
OE Replcement Fuel Pump | Universal Fitment. |
Brand | Walbro TI Autmotive |
Part Number | TIA485-2 F90000267 400-0085 125-190 |
tagz | Walbro 450, TIA485, F90000267, E85 Fuel Pump, Racing Fuel Pump, F9000267, Walbro 267, Ethanol Safe, E85 Compatible, Universal E85 Fuel Pump. E85 Racing fuel pump |
Short Description | Walbro 450LPH - TI Automotive TIA485-2 Fuel Pump Outlet diameter: 10mm (3/8") Diameter (upper body) 39mm Diameter (lower body) 50mm Caution: Extremely High Counterfeit Rate - Buy from an Authorized Dealer Only |