Walbro FRA-2 Fuel Pump - Industrial **Special Order**

$337.01
In stock
SKU
FRA-2
**Special Order:** This item is not regularly stocked and may require additional processing time before shipment.

The FRA2-1 Industrial Fuel Pump is appropriate for a number of applications. Its estimated 5000-hour durability, quiet performance, and low electrical draw all make this a great pump for many users. The FRA2-1 replaces the Walbro fuel pump in various aftermarket applications.
**Special Order Information:**
We understand that this item is essential to you. Please note that it is a special order, and obtaining it might take longer than usual. Our team is actively working to secure this product for you.

**What to Expect:**
- Extended Processing Time: Please anticipate a longer processing time before your order ships.
- Manufacturer Delays: Due to the limited demand and specialized nature of the product, delays from Walbro are possible.

FRA-2 SERIES FUEL PUMP

The FRA2-1 Industrial Fuel Pump is appropriate for a number of applications. Its estimated 5000-hour durability, quiet performance, and low electrical draw all make this a great pump for many users. The FRA2-1 replaces the Walbro fuel pump in various aftermarket applications.

All Walbro Marine and Industrial Fuel Pumps Feature:

  • Low Current Draw
  • Reverse-Polarity Protected up to 60 minutes
  • Self-Priming (Dry Lift) of more than 24" (120 cm)
  • Dry Run to Four Hours
  • Compatible With All Commercially-Available Pump-Grade Gasoline, Gasohol, Diesel, or Bio-Diesel
  • Operating Temperature from -40° to 155° Farenheit (-40° to 70° Celcius)
  • Protection from Transient Voltages to 100 vdc
  • US Coast Guard Approved (USCG 16623-1 and USCG 16623-2)
  • European CE Standard Approved (EN 61000-6-2 and EN 63-2100)

Additionally, all Walbro FRA-Series Pumps Feature:

  • Continuous Duty Life Over 5,000 Hours (Diesel Fuel)
  • Weight of 1.63 lbs (0.74 Kg)
  • Pump Cycles Continuously When Powered
PERFORMANCE
  • Voltage: 12 Volt (9.0 min – 16.0 vdc max)
  • Minimum Flow Rate: 60 liters per hour (16 gph)
  • Deadhead Pressure: 17.3 to 31 kPa (2.5 to 4.5 psi)
  • Maximum Current Draw: 2.0 amps
  • Life: >5,000 hours
  • Dry Lift: 24 inches
  • Compatible Fuels: No-lead regular gasoline, premium gasoline, gasoline-alcohol blends, diesel and biodiesel fuels (20% and 100%), and E85
  • Corrosion Resistance: 96 hour salt spray test (ASTM B-117)
  • Operating Temperature Range: -40ºF to 155ºF (-40ºC to 68.3ºC)
ELECTRICAL
  • Reverse Voltage Protected
  • Transient Voltage Protection
  • Ground: Circuit Board is Internally Grounded to Pump Body
  • Electrical Connection: Flying leads (2); No connector
  • Fuse: 5 amp recommended
MECHANICAL
  • Inlet & Outlet Size: 1/8-27 NPSF
  • Inlet Filter Screen: 70 micron
  • Magnetic Trap: None
  • Outlet Check Valve: None
AVAILABLE OPTIONS:
  • Adjustable Pressure Regulator 135-631
  • Outlet Check Valve Fitting 128-3202 (5/16 Hose Barb)

The FRA series fuel pump is designed to supply fuel for internal combustion engine applications only. It is not intended or designed for continuous operation applications such as heater or stove systems.

More Information
Part Number FRA-2
Short Description **Special Order:** This item is not regularly stocked and may require additional processing time before shipment.

The FRA2-1 Industrial Fuel Pump is appropriate for a number of applications. Its estimated 5000-hour durability, quiet performance, and low electrical draw all make this a great pump for many users. The FRA2-1 replaces the Walbro fuel pump in various aftermarket applications.
Write Your Own Review
You're reviewing:Walbro FRA-2 Fuel Pump - Industrial **Special Order**
Your Rating
Copyright © 2003-present WalbroFuelPumps.com, Inc. All rights reserved.